It is estimated that many owners have used the shut off device, but the number of owners who know that the shut off device has sleep mode may be a small number. Hibernation mode, as the name suggests, is the choice to temporarily not work in order to save more energy. shut off device Unlike wired, it is a positioning device with its own power supply. Since it comes with its own power supply, the battery capacity is inevitably limited. The higher the operating frequency, the more energy is consumed, and the service life of the battery will be correspondingly reduced.

Then, it is particularly important to work effectively, and the energy consumed in the effective work can make it play the greatest role in the limited energy. This is the reason for the development of sleep mode, GPS positioning manufacturers to improve the battery storage capacity of the shut off device.

At present, the three common sleep modes of the shut off device on the market are: intelligent standby mode, timing mode, and vibration induction sleep.

Intelligent standby mode: In this mode, the device will not upload positioning data to the platform, when the user wants to understand the location information, they need to send their own instructions, so that the locator will automatically enter the intelligent standby mode after sending the location information to the user.

Timed mode: Some users find it troublesome to send instructions manually each time and choose timed mode. In other words, the GPS locator automatically uploads data at a fixed, pre-set time every day. As in smart mode, the data will automatically enter the sleep state after uploading.

Vibration-induced sleep: This mode is that as long as the locator senses enough vibration, it will start work from the sleep state, and does not require the user to manually trigger the work command. As long as the vibration amplitude reaches the sensor sensitivity of the locator, the device will wake up. If the vibration is not detected for long, the device will go to sleep.

However, which kind of hibernation state is required, which requires users to understand the basic functions of the device at the beginning of the purchase of the locator, and see if these hibernation modes are not available. If you have it, you can set it up in the background according to the instructions.

shut off device https://www.eelinktracker.com/gps-tracker-engine-shut-off-devices-tk121.html